Line 6 Catalyst 60
| Quantity: | |
|
|
|
Add to Cart | |
;){kind=link}
Six original amplifiers ranging from pristine clean to modern high-gain, all crafted by the Line 6 sound design team employing our celebrated HX technology.
At the heart of Catalyst amps are a familiar set of volume, gain, tone, and reverb controls, while just “under the hood” are numerous effect and other options.
Provides a professional connection to P.A. and recording systems. Includes a Ground Lift switch.
Each amp features a custom Boost. Adjust the boost amount and switch the boost on/off using the dedicated Boost knob and button.
Select one of six reverb types. Adjust the reverb amount and switch the reverb on/off using the dedicated Reverb knob and button.
Choose from six types each of Modulation, Delay, and Pitch effects—all drawn from our celebrated HX and Legacy effects libraries.
Insert external effects and other devices into your signal chain using the Effects Loop.
Provides half power, 0.5 watt, and speaker Mute options for reduced volume with minimal tone variation.
Use Catalyst as a powered speaker by bypassing the preamp. Perfect for use with amp modelers and simulators.
Use this to connect to the Catalyst Edit app (Mac®, PC, iOS®, Android™) and to the onboard audio interface, which provides 4 channels (4in/4out) at 24-bit, 44.1/48kHz.
Catalyst 60 supports MIDI over USB-B
The 2-button LFS2 is a roadworthy metal latching footswitch that provides remote control of Channel and Effect on/off status. The Effect switch may be reassigned via the Catalyst Edit app. A ten-foot right-angle/straight TRS cable is included.
At the heart of Catalyst amps are a familiar set of volume, gain, tone, and reverb controls, while just “under the hood” are numerous effect and other options.
Provides a professional connection to P.A. and recording systems. Includes a Ground Lift switch.
Each amp features a custom Boost. Adjust the boost amount and switch the boost on/off using the dedicated Boost knob and button.
Select one of six reverb types. Adjust the reverb amount and switch the reverb on/off using the dedicated Reverb knob and button.
Choose from six types each of Modulation, Delay, and Pitch effects—all drawn from our celebrated HX and Legacy effects libraries.
Insert external effects and other devices into your signal chain using the Effects Loop.
Provides half power, 0.5 watt, and speaker Mute options for reduced volume with minimal tone variation.
Use Catalyst as a powered speaker by bypassing the preamp. Perfect for use with amp modelers and simulators.
Use this to connect to the Catalyst Edit app (Mac®, PC, iOS®, Android™) and to the onboard audio interface, which provides 4 channels (4in/4out) at 24-bit, 44.1/48kHz.
Catalyst 60 supports MIDI over USB-B
The 2-button LFS2 is a roadworthy metal latching footswitch that provides remote control of Channel and Effect on/off status. The Effect switch may be reassigned via the Catalyst Edit app. A ten-foot right-angle/straight TRS cable is included.
